Washing machine wouldn't drain or spin. It would run through its cycle, but only agitate.

ApplianceFrigidaire Washer

Model

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Pliers
Screw drivers
Socket set

Jen From Lebanon, OH

Oct 08, 2008

6 out of 6 people found this instruction helpful

Use a cup to take the water out of the washer. Get at least three large towels -- you're going to have to sop up the water when you disconnect the hoses.

Take the bottom panel off (2 Phillips head screws). Drain pump is on the right side.

Remove the two screws holding the pump to the metal bottom plate. Use a small socket wrench and/or a screwdriver. I had to use a screwdriver on the right screw and a socket wrench on the left screw! Place as many towels in the cavity as you can to catch the water that's going to come out when you detach the hoses.

There is an inlet hose and an outlet hose, attached with bright green clamps. Remove those with pliers. Clean up the water that drains out. The hose in the back (inlet) has a "coin catcher" area. Clean this out.

Attach the hoses to the new pump. Screw it down. Replace the bottom panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drain Pump and Motor Assembly (Now subbed to Drain Pump - 60Hz 120V)

Part Number: PS2342445

$84.22
In Stock