No Spinout or regular motor speeds

ApplianceMaytag Washer


Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Jonathan From Park Forest, IL

Oct 07, 2008

10 out of 14 people found this instruction helpful

remove back panel 3 phillips and 2 1/4" machine screws. checked lid switch for proper contact. checked timer on the spin cycle in regular wash mode and tested the contacts that were requested per schematic with washing machine. verrified that the timer was the problem, actually if you take the plasic cover off you can see the contactors and if you look for the one that is bad you can verifiy by looking for burned contacts, rember that everything electrical is testable there should be no guessing.
replaced the timer and tested washing machine in regular and passed, re-assembeled back cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 22003361 (Now subbed to Timer)

Part Number: PS2020966

In Stock