ApplianceGeneral Electric Dryer
Level of DifficultyEasy
Time to do repairMore than 2 hours
Age of ApplianceMore than 10 years
mitchell From Warren, NJ
Oct 01, 2008
1 out of 1 people found this instruction helpful
Open top by removing 4 phillips head screws above opened door, pop top up. Remove rear access panel, remove belt from drive & tension pully. Loosen top front screws, remove front panel to gain access to remove drum. After drum removed, I realized why rear bearing went bad- two front guides were worn causing rear bearing to angle and wear out. Replaced front pads, buttoned her up and now quite as new. Also replaced drive belt while in there.