Leak at the seal

ApplianceWhirlpool Dishwasher

ModelDU810SWLQ0

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Craig From Southern Pines, NC

Sep 26, 2008

2 out of 3 people found this instruction helpful

Getting the dishwasher out was easy. Getting to the impeller was easy. Getting the impeller off of the motor shaft was the difficult part. I had to use my Dremel tool with lots of cutoff wheels to cut the impeller off of the motor shaft a little piece at a time. It appeared to be rust on the motor shaft that was causing the impeller to not come off. There is not much room for the Dremel so be careful not to nick the pump housing or cut into the motor shaft. Keep the vacuum close by to clean out the plastic impeller shavings. Clean the rust off the shaft with steel wool, fine sandpaper etc. Assembly was easy once everything was cleaned up.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Disk and Mount

Part Number: PS342874

$23.71
In Stock

Impeller and Seal Kit

Part Number: PS370847

$18.91
In Stock