Oven used broiler element not bake to maintain temp

ApplianceGeneral Electric Range


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Travis From Thomasville, NC

Aug 16, 2007

29 out of 36 people found this instruction helpful

Pulled Circuit Breaker to turn off power to oven

Removed oven door just to get it out of way

Removed top panel by removing two screws on
underneath panel left and right

Panel must be lifted to releace from two guide pins
At top, I used towel protect panel and layed panel
down flat.

I drew picture of old ERC and labeled where each
Wire went and what color it was.

I removed old ERC by removing four screws and
placed it next to new ERC.

I made drawing of new ERC-3 and decided where
each wire would go.

The replacement instruction apeared difficult to me the first time I read them, but after finding the
Small stamped letters on the broil and bake controls on the ERC it became fairly easy.

There are more connections on the new ERC
Than I needed for my Installation. I installed the
New ERC and everything worked fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Clock Control

Part Number: PS238574

In Stock