Models > WTW6200VW0 > Symptoms > Will not agitate

Parts That Fix Whirlpool Washer WTW6200VW0 Will not agitate

Will not agitate is a commonly reported symptom for the WTW6200VW0 Whirlpool Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your WTW6200VW0 Whirlpool Washer that will fix Will not agitate. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Seal, Inner Cap
Fixes Symptom 55% of time
Seal, Inner Cap – Part Number: WPW10072840
★★★★★
★★★★★
11 Reviews

Rated by 77 customers 

  

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.   

This is an inner cap seal, but may also be known as an O-ring, and it is a part for your washing machine. Some symptoms replacing this part will fix include: leaking from your appliance, uncontrollable shaking and moving, loud noise, pumps but will not spin, or if your appliance will not agitate. This model is off-black in color and 3 inches in diameter. You will find this part inside the agitator in the middle of your washing machine. It is recommended to wipe down the barrier before putting the new seal on.

$ 11.10
  In Stock
PartSelect Number PS11748108
Manufacturer Part Number WPW10072840

Replacing your Whirlpool Washer Seal, Inner Cap

Replacing your Seal, Inner Cap

Customer Repair Stories

The cap thingy seal broke and splattered fabric softener.

I pulled out the old cap with my hands and jammed the new thingy into place. The lady of house did the repair. Easy
  • Diane from Corvallis, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!

The seal in the upper agitator cap broke

I just unscrewed the top agitator cap and slid the o-ring on and put it back. Done in seconds.
  • Veronica L from Junction City, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 Agitator Cap Barrier with Seal
Fixes Symptom 36% of time
Agitator Cap Barrier with Seal – Part Number: WPW10074580
★★★★★
★★★★★
11 Reviews

Rated by 30 customers 

  

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.   

The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.

$ 11.10
  In Stock
PartSelect Number PS11748113
Manufacturer Part Number WPW10074580

Replacing your Whirlpool Washer Agitator Cap Barrier with Seal

Replacing your Agitator Cap Barrier with Seal

Customer Repair Stories

The seal was broken on the agitator cap barrier

Removed the fabric softner at the top of the agitator (needed a screw driver to pry it loose) and reached in to grab the barrier with my hand and pulled it out, very simple to do.When I put the new one in I put some liquid soap on the gasket and it snapped right into place.Very easy to do, all is well now, thanks Part Select.
  • Ralph from New Milford, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!

Found seal had split on agitator cap

I clean out the fabric softner dispenser on my machine on a regular basis and found the seal split. After looking at several sites to try and find this part, I found this one. Ordering couldn't have been easier and repair only required pulling up the cup for the softner and installing the cap.

Thanks for making finding part so easy . . . .
Read less
  • Kim from Cleveland, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
3 Basket Hub Kit
Fixes Symptom 6% of time
Basket Hub Kit – Part Number: W10820039
★★★★★
★★★★★
25 Reviews

Rated by 9 customers 

  

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.   

This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.

$ 37.73
  In Stock
PartSelect Number PS11723155
Manufacturer Part Number W10820039

Customer Repair Stories

Washer would vibrate and bang viciously in the spin cycles

Remove agitator and replace hub. I also recommend replacing the Suspension too. I could tell the hub was bad the piece of metal washer on the bottom was gone. The suspension lost a lot of its stiffing
  • Jerry from YORK, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Socket set
19 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

The washer was making a horrible noise during the spin cycle

Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitrating oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
Read less
  • Kevin from CLARK, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
48 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
4 Sensor
Fixes Symptom 3% of time
Sensor – Part Number: WPW10178988
★★★★★
★★★★★
10 Reviews

Rated by 2 customers 

  

Really Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.   

This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To complete this repair, you will need an Allen wrench, 3/8 inch socket, and a screwdriver. The repair will involved turning off the power and water supply, and tilting the washer on its front to access the sensor.

$ 43.95
  In Stock
PartSelect Number PS11749664
Manufacturer Part Number WPW10178988

Replacing your Whirlpool Washer Sensor

Replacing your Sensor

Customer Repair Stories

mins after start it stopped and got code f51. then put it manual spin and got UL code

followed repair manual for code f51.ordered/replaced Rotor Position Sensor {RPS} disconnected and reconnected wiring harness at computer module and then put everything back together and that took care of the problem, It;s been working good since. that sensor was delivered the very next day. that was great. thank you
  • victor m from campo, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

F51 error code

Pretty easy! Just follow this link on how to fix the problem:

https://www.youtube.com/watch?v=_-Hg8rLGiKQ

The hardest part on fixing this is trying to move the washer out of its place so I can tilt it to see underneath the washer where the repair would be.
  • Edgardo from SALEM, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top