Models > RB787WH1WW > Symptoms > Little to no heat when baking

Parts That Fix Hotpoint Range RB787WH1WW Little to no heat when baking

Little to no heat when baking is a commonly reported symptom for the RB787WH1WW Hotpoint Range, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your RB787WH1WW Hotpoint Range that will fix Little to no heat when baking. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Bake Element - Push On Terminals - 240V
Fixes Symptom 85% of time
Bake Element - Push On Terminals - 240V – Part Number: WB44K10005
★★★★★
★★★★★
91 Reviews

Rated by 36 customers 

  

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.   

The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, it will need to be replaced. This element is 19 inches wide x 19 inches long, and has male spade push on terminals.

$ 122.85
  In Stock
PartSelect Number PS249238
Manufacturer Part Number WB44K10005

Replacing your General Electric Range Bake Element - Push On Terminals - 240V

Replacing your Bake Element - Push On Terminals - 240V

Customer Repair Stories

Broken heating element

1)Turn off power to stove
2)remove 2 bolts holding heating element
3)pull element out of the back of the oven about 8" so that the wire connects is visable
4)pull wire clips off of heating element and remove element from the oven
5)put wire clips on the new heating element
6)push new heating element back into the holes in the back of the oven
7)screw botls back into the oven holding the heating element in place
8)Turn power back on
Read less
  • Paul from anna, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
73 of 85 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Lower bake Element would not heat.

First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect.
  • Ronald from Nassau, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
221 of 244 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 Temperature Sensor Kit
Fixes Symptom 10% of time
Temperature Sensor Kit – Part Number: WB23X5340
★★★★★
★★★★★
8 Reviews

Rated by 6 customers 

  

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.   

This kit includes the sensor as well as the connectors. NOTE This sensor is 2" long.

$ 208.65
  In Stock
PartSelect Number PS236490
Manufacturer Part Number WB23X5340

Replacing your General Electric Range Temperature Sensor Kit

Replacing your Temperature Sensor Kit

Customer Repair Stories

defective temp. sensor

Removed oven from cabinet. unblug old sensor pluged in new and reinstalled oven. Esay repair though wish oven was designed so did not have to pull itout of cabinet which requires disconect electric cabel
  • Armand from COVENTRY, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
19 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Oven sensor was not holding temperature range.

Per the instructions included with part.
  • CHARLA from NEW BRAUNFELS, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
44 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
3 CONTROL OVEN TO9
Fixes Symptom 6% of time
CONTROL OVEN TO9 – Part Number: WB27X45466
★★★★★
★★★★★
53 Reviews

Rated by 29 customers 

  

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.   

This part is also known as the "brains" of the appliance. ***NOTE: The wiring could be different than the original control. This part may need to be installed by an appliance repair person.

$ 198.44
  In Stock
PartSelect Number PS16873547
Manufacturer Part Number WB27X45466

Customer Repair Stories

after lightning cooktop worked oven did not

called service co. and described problem while i was looking at parts diagram and he agreed with my feeling what part got fried. he told me the part would be 183.00 plus labor and drive time. when i told him i was looking at the part on line for 65 dollars he hung up on me. i recieved the part and was slightly dissapointed to know there was a sepperate adhesive overlay. i saw that it was a sepperate part but if i knew it was adhesive i would have spent the extra 20 dollars for a new one. but, to my surprise the old one peeled off easily and gently re-apllied it to the new conrol board alighning it well seemed to be the trickiest part of the job. took the five wires with connectors out of the old one and inserted them into the same place on the new one. removed the old one from the frame (4 pan phillp sheet metal screws) and then screwed the new wired control board in. plugged in the unit and pressed the bake button and then mixed the brownie batter. replaced the back panel cover. 65 dollars and 15 minutes.

thanks

bob
Read less
  • robert from OXFORD, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
46 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Blown Oven Control Board

After removing the back of the range the oven control board was visible and accessible by removing four nuts. There was some resistance removing the leads from the oven coils and light-bulb mechanisms but with some leverage and pliers they came loose. The only challenge was the face plate of the unit is attached using adhesive and needed to be carefully peeled off and added to the new oven control board. Getting this right was just a matter of taking time and lining up the components correctly. After applying the face, the new control board went right in. I reattached the back, plugged the unit back in, and the over has worked great for the past week. Part select being able to identify the part numbers listed from the component likely saved me at least $100 of having a GE certified repair technician come in.
Read less
  • Julien from Barnhart, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
52 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top