Models
>
HA207S
HA207S Maytag Washer - Overview
Sections of the HA207S
[Viewing 1 of 1].gif "50 CYCLE CONVERSION LIST Diagram and Parts List for Maytag Washer")
Keep searches simple, eg. "belt" or "pump".
Pump Belt
PartSelect #: PS11738870
Manufacturer #: WP211451
This helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.
$58.42
Special Order
Questions And Answers for HA207S
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Agitator was moving very slowly.
Unhooked water and drain lines, Unplugged electrical. Removed the two phillips screws at the bottom of the front cover. Removed the Front cover. TIpped machine backwards at about a 45 degree angle using a 2x4 to support the machine. Removed the pump belt and the drive belt. Installed the old pump belt and the new drive belt. Loosene
... Read more
d the 3 each 5/16" bolts holding the pump mechanism and moved pump to the left. Moved pump to right to tighten pump belt and tightened the left pump bolt. Loosend the one pump bolt and pulled the motor to the left to tighten the drive belt and holding in this position I tightened the pump screws, Pump belt was now looser than the drive belt. Ran washer and it worked perfectly.
Read less
Parts Used:
-
Gary from ENUMCLAW, WA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!