The drum support roller (Dryer Drum Support Roller, Drum Roller and Washer Assembly) holds the drum in the proper position while it spins on the support wheels. This part rotates on the roller shaft w...
$13.50
In Stock
Order within the next 31 mins and your part ships today!
The front glide is located at the front of the dryer, the drum rides along it. If you hear a metal-on-metal noise when your dryer is running, your front glide may be worn out and require replacing. Th...
$14.70
In Stock
Order within the next 31 mins and your part ships today!
This roller shaft is also known as a support roller shaft or a drum roller axle, and is a part for your dryer. The function of this piece is to act as the axle for the drum roller; it provides a place...
$9.81
In Stock
Order within the next 31 mins and your part ships today!
This multi rib belt spins the dryer drum during the drying cycle. This belt is 91-5/8 inches in length, 3/8th of an inch wide and has five ridges. It is black in color and made of rubber. You may need...
$28.37
In Stock
Order within the next 31 mins and your part ships today!
This is a replacement lint filter for your dryer. The lint filter is approximately 12 1/2 inches in length. Simply remove the existing filter and replace it with the new one. Check for an excess build...
$44.63
In Stock
Order within the next 31 mins and your part ships today!
This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter....
$7.88
In Stock
Order within the next 31 mins and your part ships today!
The idler pulley tightens the drive belt to properly spin the dryer drum. It is attached to an idler bracket. This part comes with the idler pulley and center bearing. To replace this part, you will n...
$22.11
In Stock
Order within the next 31 mins and your part ships today!
This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.
$32.12
In Stock
Order within the next 31 mins and your part ships today!
If you notice that your dryer is noisy or will not tumble, then you may need to replace the drum roller shaft washer. This drum roller shaft washer is just under an inch in diameter and is sold indivi...
$13.79
In Stock
Order within the next 31 mins and your part ships today!
This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appli...
$32.34
In Stock
Order within the next 31 mins and your part ships today!
This is a drum felt seal for your dryer. It creates an airtight seal between the dryer rear panel and the back of the drum. It is important that this seal be flexible so it does not interfere with the...
$15.93
In Stock
Order within the next 31 mins and your part ships today!
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.
$13.45
In Stock
Order within the next 31 mins and your part ships today!
Questions And Answers for MDE6000AYW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
January 1, 2024
There is no wiring diagram for MDE600AYW electric diagram. You only have the diagram for a gas model. Specifically the machine connection at the power block.
For model number MDE6000AYW
Hi Ken, Thank you for reaching out. For the wiring diagram we suggest referring to the manual, or checking the wiring diagram that is located inside the control console. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
December 14, 2023
My dryer quit working after I had a home main breaker problem. The panel was replaced but I fear a surge damaged the dryer. The dryer will tumble but will not get hot. Do you have any advice on troubleshooting?
For model number MDE6000AYW
Hi Mark, thank you for your question! Based on the description, we concluded that the issue is with the cycling thermostat, part number PS11741406. The cycling thermostat monitors and regulates the temperature inside the dryer. We would recommend checking the thermostat to fix the issue. We hope this solves your problem!
Need a good part number. Replacing belt, rollers and pulley
For model number MDE6000AYW
Hi Keith, thank you for reaching out to PartSelect. The drum support roller kit for your model is part number PS1570070, the belt is part number PS11741110, and the idler pulley is part number PS11743032. We hope this is what you were looking for!
Dryer squeaks when first starts and stops after a few minutes
For model number MDE6000AYW
Hello Charles, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the drive belt, part number PS11741110, to solve the problem. We hope this helps.
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of t
... Read morehe front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job. Thank you.