This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the ro...
This is an OEM lint filter for a dryer. This lint filter screen has two side guides on either of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide. This part i...
The high limit kit comes with three separate thermal fuses for dryers. One electric thermal fuse with a limit of 258, one gas high limit at 240, and one gas and electric high limit thermostat with a l...
This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appli...
This dryer heating element kit is 240 volts and 4750 watts. The function of the heating element is to produce the heat that allows you to dry your clothing during your dryer cycle. If your clothes tak...
This blower wheel clamp, used in a clothes dryer, is a clamp that holds the blower wheel to the motor shaft. This part helps hold the blower wheel in place to function easily and properly. If your clo...
The rear dryer drum roller functions by holding the drum in place while the drum rotates on support wheels during the drying spin/tumble cycle. Included in this rear drum support roller kit are four s...
If this part appears to be too wide for your particular appliance, per the manufacturer, all you have to do is pull it apart.
$86.61
In Stock
Questions And Answers for PYE2300AYW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
8 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
March 12, 2020
Dryer won’t start but has power
For model number PYE2300AYW
Hi Gary,
Thank you for your question. If the dryer will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the high limit kit, the multi-rib belt, the door catch kit, the timer resistor and the high limit thermostat. You will need to test the parts with a multi-meter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. For the door catch and strike, you will need to test the parts visually for signs of damage and to verify if the parts are aligned correctly. The belt will also need to be inspected to verify if it is installed correctly and you will need to check it for damage. For more information on how to test these parts, click on the Appliance Repair link on our website and on the next page that comes up click on the dryer icon. When the next page comes up, you will be provided with a symptoms list. Choose the "Will not start" symptom and the information will come up for you. Not all the parts may be listed under this option and you will need to check the other symptoms for information on them. We hope this helps. Thank you and have a great day.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dale
December 6, 2019
Which blower wheel can replace the one i have... what number
For model number PYE2300AYW
Hello Dale, thank you for inquiring. The replacement for your model is Blower Wheel part number PS2030883. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Aj
March 24, 2022
Dryer has an odor in it and the clothes smell after drying what is causing this
For model number PYE2300AYW
Hello AJ, Thank you for your inquiry. It depends on where the smell is coming from as there are several causes. It could be moisture or mildew in the lint trap and lint duct, so we would recommend checking the lint filter, and lint duct housing. You can wash both in warm soapy water and dry completely before replacing in the dryer, and make sure your vent hose is free from debris that could cause an odor. If it is more of a burnt smell, it could be an issue with the motor or the heating element. Check the motor and heating element with a multimeter, and check the blower wheel for any obstructions. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hi Frank, thank you for contacting us. According to our research, if the timer, part number PS11742813, does not turn, then it is most likely faulty and may need to be replaced. Before replacing the timer, make sure that the knob is properly in place and not damaged. Let us know if you have further questions!
I pulled out the broken lint filter and put the new one back in, real easy. I am so happy with the prompt delivery I got from PartsSelect.com. I ordered on a Monday and and it was delivered on a Wednesday
1. Unplug dryer from power outlet 2. Lift dryer top from front (hinged in rear). Just friction holding top down. Use flat scewdriver wrapped in cloth to help lift. 3. Locate heating element - rear top behind drum 4. Unplug red wires to the high limit thermal fuse 5. Unplug red wires to the heating element 6. Unlug
... Read more white wires to the high limit fuse 7. Remove high limit thermal fuse 8. Remove heating element 9. Remove high limit fuse 10 Clean heating box Installation is reverse order but do the following first! Clean lint trap - Remove front of dryer 1. Unplug white door switch wires. inside front top right 2. remove two screws securing the front of dryer - inside front top left and top right. Front of dryer is hinged at bottom 3. Clean all the lint you can find. If you have never cleaned out the lint, there might be a lot and the cause of over heating (shorting fuse life). Add to your yearly things to do list. 4. While your at it check the alignment of the plastic glides the drum sits on. 5. Also check the foam gasket between the fan housing and lint trap. Mine was off a bit. Realigned with doubled sided tape.
I was about to purchase a new dryer because of the age of my dryer and not wanting to hire someone to fix it. After a little web research, I saw several do-it -yourself stories indicating this was a very easy repair.
This was an extremely easy repair and it save me lots of $$: (1) Disconnected power (2) Opened the
... Read moretop of the dryer (3) Disconnected wires to temperature sensor. (4) Used a 1/2" socket wrench with extension and a drill to remove 2 screws holding down the temperature sensor (5) Removed 1 screw holding down the heating element. (6) Removed wires connected to heating element and pulled out old element. (7) Reassembled new element. (8) Turned on empty dryer for 30 minutes to burn off smell from the new element.
