This V-style drive belt measures 51 inches long and 3/8 inches wide. The belt is made to slip on the motor pulley to bring the basket up to the speed required. Continued use can result in the belt suf...
The lid hinge on your washer is connected to the lid and allows it to open and close. If you find you cannot open or close the lid to your washing machine properly, you may need to replace the lid hin...
This lid hinge pin allows a washing machine lid to pivot open and closed properly. The hinge pin may need to be replaced if the lid will not open or will not close. The part is white and made of plast...
The snubber ring is a piece that is specific to your washing machine. The function of the snubber ring is to reduce noise and vibrations within your washer. It fits in between the leg and the dome ass...
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. If your machine is not draining properly or if it is noisy and s...
This transmission pulley and bearing kit, also known as thrust bearing kit or washer pulley and bearing kit, includes the pulley, washer, thrust bearing, two upper race washers, and one lower race was...
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
This package contains a new set of six springs. The suspension springs in your washer connect to the bottom of tub, and help to hold it in place. If your washer tub shakes, or moves around a lot durin...
This water valve is for 60% hot water and 40% cold - This is done to save on energy.
$123.10
In Stock
Questions And Answers for PAVT244AWW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
December 11, 2019
In my previous question about loud clicking noise during spin cycle you recommended replacing the break rotor ps2347192 but the parts list show it as no longer available? Also i am not sure it is a break problem as at the end of the spin cycle the drum stops very quickly without any noise.
For model number PAVT244AWW
Hello Robert, thank you for your question. Yes, we apologize, the rotor has been discontinued for this unit. The brake and rotor assembly stop the tub and help to aid in the changing to and from agitation and spin. If the clicking noise is just when the spin cycle is going we would recommend checking the Transmission Pulley and Bearing Kit PartSelect Number: PS2003651 and the Lower Bearing Assembly PartSelect Number: PS2003141. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Debra
January 26, 2020
I am not too sure what is wrong with my washer. The drum is very loose, it gets unbalanced for almost every load, very noisy, squeals, we have no appliance person in our small town, so am hoping that my daughter & i could fix it ourselves. Could you please maybe give me some advice as to what is wrong with it. Thank you
For model number PAVT244AWW
Hello and thank you for writing.
It certainly sounds like it could be a faulty suspension springs PS2004049 and suspension spring hooks PS11738807, you should check the part(s) for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
I would like to no do i need the ser.Csr 0613361 for door hook/strike
For model number PAVT244AWW
Hi Tracey,
Thank you for your question. You will not need the serial number to purchase the lid switch actuator.
The part number listed under your model number for the lid switch actuator is PS11742355. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
I need to know the year this washer was made? serial number 10948960CT Please advise. thanks!
For model number PAVT244AWW
Hello Gayle, thank you for contacting us. We have researched and found that your model was manufactured in 10/2003. We hope this information helps!
Was this helpful?
Thank you for voting!
Robert
December 10, 2019
Our Maytag washer makes a loud clicking sound when speeding up during the spin cycle. It takes a long time to come up to full speed especially when the load is large. The water appears to be pumpin out normally. The drum may also be ocillating abnormally (dont know what normal shaking looks like).
For model number PAVT244AWW
Hello Robert, thank you for your question. We would recommend checking the Washer Brake Rotor PartSelect Number: PS2347192, Hub and Seal Kit PartSelect Number: PS2349020) for the cause of this issue. I hope this helps.
I used a flat screw driver to push in on the releases so I could raise the top of the machine. I then used a torx tool to remove both parts of the hinge, and then used a #2 phillips screw driver, on the new screws I'd also ordered, to re-attach both of the hinge parts. Every thing went just as anticipated.
The pump is located behind a small panel on the back, lower left side of my washer. It's attached to the bottom frame with 3 screws. It has two hoses attached, each with one spring clamp. Lift one side of the washer and slip the drive belt off the pully. Release the spring clamps on the hoses with a pair of pliers and remove the hoses. A
... Read moresmall amount of water will drain from the hoses and pump when removed. Remove the three screws holding the pump to the frame and remove the pump. Install the new pump in the same position. Reattach the hoses, replace the belt, and reinstall the cover panel. That's all there is to it.
unplug the washer. Removed the top of the washer by removing the hold scews and tabs on the upper back. Place a scew drive under the front and pry up to release the snap tabs. Then the front panel by removing the two screws on top and lift the panel up to expose the motor at bottom front. Remove the motor cover (plastic)and motor from the
... Read more base, replace the pulley on the shaft (you may need to break or pry the old pulley off) install the new pulley making sure it is all the way up the shaft locking the tabs into the shat groove. Reinstallmotor to the base. To replace the belt, tilted the unit backwards to access the pulleys from the bottom and installed. Note: it ios easier to install the belt fully on the two smaller puleys attcahed to the drive motor and pump and then wrap as much as you can around the larger drum pulley. Hold the belt in one hand and turn the drum pulley clockwise with the other and the belt will follow and install. reverse steps to reassemble.
.gif "SUPPLEMENTAL INFORMATION Diagram and Parts List for Maytag Washer")
