Models
>
MAV7600AWW
MAV7600AWW Maytag Washer - Overview
Sections of the MAV7600AWW
[Viewing 8 of 8]
Manuals & Care Guides for MAV7600AWW
Click to downloadKeep searches simple, eg. "belt" or "pump".
Suspension Spring
PartSelect #: PS11738823
Manufacturer #: WP21001598
This suspension spring is 7 inches in length, and is sold individually. It is a good idea to replace all six springs at once to maintain the same tension level. To complete this repair you will need a...
$11.80
In Stock
Drain Pump with Pulley
PartSelect #: PS11741799
Manufacturer #: WP35-6465
This drain pump with pulley, also known as the washing machine drain pump assembly, is a pump with two ports. The function of this pump is to help expel water from your washing machine. The pump is ac...
$84.63
In Stock
Snubber Ring
PartSelect #: PS11738845
Manufacturer #: WP21002026
The snubber ring is a piece that is specific to your washing machine. The function of the snubber ring is to reduce noise and vibrations within your washer. It fits in between the leg and the dome ass...
$13.11
In Stock
Washer Drain Pump
PartSelect #: PS11741803
Manufacturer #: WP35-6780
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. If your machine is not draining properly or if it is noisy and s...
$120.13
In Stock
Transmission Pulley and Bearing Kit
PartSelect #: PS2003651
Manufacturer #: 12002213
This transmission pulley and bearing kit, also known as thrust bearing kit or washer pulley and bearing kit, includes the pulley, washer, thrust bearing, two upper race washers, and one lower race was...
$69.83
In Stock
Drive Belt - 52 inches long
PartSelect #: PS11739438
Manufacturer #: WP22003483
This washing machine drive belt is used with some clothes washers. This belt is all black in color and is made entirely of rubber.
$37.77
In Stock
Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
In Stock
Timer Knob Insert Cap
PartSelect #: PS11739300
Manufacturer #: WP22001664
This timer knob insert cap is just over two inches in diameter. It is all white in color and is made of plastic.
$11.10
In Stock
Motor with Pulley
PartSelect #: PS11738839
Manufacturer #: WP21001950
This motor is a 2 speed, 1/2 HP, 120V, 60Hz.
$163.40
In Stock
Lid Switch Actuating Cam
PartSelect #: PS11723080
Manufacturer #: W10814230
This is a replacement lid switch actuating cam for your washer. The cam is located on the underside of the washer lid, near the hinge. The cam actuates the lid switch, so your washer knows the lid is ...
$9.76
In Stock
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Lid Switch
PartSelect #: PS11739463
Manufacturer #: WP22003804
The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
$56.45
In Stock
Questions And Answers for MAV7600AWW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- 2
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
BARDELL
March 12, 2020
Does this washer have a balance ring?
For model number MAV7600AWW
Hello Bardell, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738845 for the Snubber Ring. The function of the snubber ring is to reduce noise and vibrations within your washer. It fits in between the leg and the dome assembly. If during your spin cycle you notice your washer jumping and making loud whirring noises, you may need to replace your snubber ring. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Snubber Ring
$13.11
In Stock
Louis
January 25, 2023
Does this have self reset fuse or backer. It don't make any noise It shut off for about one hour. then it run like new.
For model number MAV7600AWW
Hello Louis, thank you for your question. The most common cause is a faulty Lid Switch PS11739463. We do not see a fuse for this model. We have a video for you to view on our site. We look forward to hearing from you.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Lid Switch
$56.45
In Stock
Additional Links:
Vickey
December 10, 2019
Washer leaks when spinning
For model number MAV7600AWW
Hello Vickey, thank you for your question. If the leak is coming from the bottom of the tub we would recommend replacing PartSelect Number PS11741798 seal, and Hub and Seal Kit PartSelect Number: PS2349020. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
November 29, 2019
How many cubic feet ?
For model number MAV7600AWW
Hello James and thanks for writing.
You might find that answer in our manual online. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the unit directly. Once you get the information you need, we should be able to find the information on our site for you. Hope this helps
Was this helpful?
Thank you for voting!
Gayla
June 17, 2021
Does this model have a filter that needs cleaning ? If so, where is it located. The manuals don’t mention it.
For model number MAV7600AWW
Hello Gayla, Thank you for the question. Checking the model number provided, it does not list a filter. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Common Symptoms of the MAV7600AWW
[Viewing 11 of 11]Leaking
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
No hot or cold water
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washing machine was making alot of noise
I found the water pump bearings were going bad from humidity. I replaced the pump with a new one and it runs quiet again.
Parts Used:
-
David from Boca Raton, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench set
561 of 571 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer tub would not spin, pump would empty water from tub.
Lay washer on front, removed belt. Removed center pulley with thrust bearing (pulley was worn on upper end, against thrust bearing, thrust bearing was worn also). Installed new thrust bearing & pulley kit. Cleaned & lubed slots that motor insulators slide in, installed new belt.
Parts Used:
-
James from Hueytown, AL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
349 of 396 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer jumping in spin cycle (white flakes under the washer)
Unlug the AC cord,open the top from the front it snaps open with a little force and hinges on the back, remove the 2 screws on the front cover and take it off, tip the washer and remove the belt, take off the pump hose from the back (I removed the back cover also) and the little hose going to the basket. Remove the 6 springs and lift the
... Read more
complete drum out of the waser and turn it upside down. You can see the plastic snubber ring that is worn, loosen the 6 screws just enough to get the old ring out and the new one in. WARNING (DO NOT TAKE THE SCREWS ALL THE WAY OUT OR THE BRAKE ASSEMBLY WILL RELEASE AND A SPECIAL TOOL IS NEEDED TO PUT IT BACK) Install the new ring, tighten the screws and put the tub back in connecting everything back up and use the 6 new springs. It really isn't that hard to do.
Read less
Parts Used:
-
David from Butler, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench set
288 of 301 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!