This EveryDrop Filter5 is certified to reduce the most contaminants with Triple Filtration Technology. Now, you and your family can enjoy the enriching benefits of cleaner, freshly filtered ice & wate...
$85.22
In Stock
Order within the next 7 hrs and your part ships today!
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack ...
$7.71
In Stock
Order within the next 7 hrs and your part ships today!
The Door Cam is a black plastic part which helps the door pivot shut while keeping the door and hinge in proper alignment. Lubricating this part upon installation may help it move easier. It attaches...
$10.56
In Stock
Order within the next 7 hrs and your part ships today!
The water inlet valve (Refrigerator Water Inlet Valve Kit) provides water for the ice maker and water dispenser. This part is located at the back of the refrigerator, and connects to the water supply....
$110.34
In Stock
Order within the next 7 hrs and your part ships today!
The “Icemaker Control Assembly” (Module & Motor Assembly, Ice Maker Control Module, Icemaker Module, Refrigerator Ice Maker Module) is what controls the actions of your ice maker. The control turns th...
$118.52
In Stock
Order within the next 7 hrs and your part ships today!
This Ice Maker (Icemaker Assembly, Complete Icemaker Assembly, Ice Maker Assembly, Refrigerator Ice Maker) can be used with 25-27 cubic feet refrigerators that have a vertical auger dispenser located ...
$145.08
In Stock
Order within the next 7 hrs and your part ships today!
This is a refrigerator ice guide that is made entirely of clear plastic. This ice guide is located in the freezer door. Turn your refrigerator ice dispenser off before replacing the part. This is a si...
$19.46
In Stock
Order within the next 7 hrs and your part ships today!
This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor ...
$79.16
In Stock
Order within the next 7 hrs and your part ships today!
If you have ice building up in your freezer, or if your freezer is getting too warm during the defrost cycle you may need to replace the bi-metal defrost thermostat. The function of the defrost bi-met...
$46.59
In Stock
Order within the next 7 hrs and your part ships today!
In this kit you will find the support, the ice door, spring, and delay. The heater ribbon is no longer needed and therefore will not be included with this part. This kit works in the dispenser chute t...
This condenser fan motor kit includes a motor, fan blade, wire harness, and screws. Used in a refrigerator, the condenser fan motor moves the condenser fan blade to direct and move air across the cond...
$127.54
In Stock
Order within the next 7 hrs and your part ships today!
Questions And Answers for KSRP25FNSS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Julia
March 6, 2020
What are the dimensions of this `fridge? I bought it in 2005. Thanks
For model number KSRP25FNSS00
Hello, Thank you for your question. We unfortunately do not have dimensions on this model. You will need to make contact with the manufacturer directly to obtain that information. We apologize. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rich
December 21, 2019
What are the dimensions of this model?
For model number KSRP25FNSS00
Hello Rick and thanks for writing.
For your convenience, we have attached the link to your manual with repair instruction. We hope this helps. Good luck with your repair
https://partselectcom.azureedge.net/assets/manuals/91896B83B4414DADB54778D24B580333C76E8C84.pdf
Was this helpful?
Thank you for voting!
Bonnie
July 13, 2021
My fridge worked well, then I moved it and now it doesn’t get cold.
For model number KSRP25FNSS00
Hello Bonnie, Thank you for the question. We suggest checking the wiring to see if something may have come loose. You can check the fan at the back of the appliance to be sure it is plugged in and running to circulate the cold air over the coils. We hope this helps!
Hello Thomas, we have researched your model and found that your refrigerator is 25.3 cubic feet. We hope this information helps. Please submit a new question if you have any follow-up queries, we look forward to hearing from you!
Was this helpful?
Thank you for voting!
Marlaine
July 6, 2023
Why the ice maker don't make ice?
For model number KSRP25FNSS00
Hi Marlaine, thank you for your inquiry. If the ice maker does not make ice, you may first need to make sure that the water filter is not clogged. If the water filter is clean, then you may need to ensure that water supply lines are properly in place, and the water pressure is suitable for the ice maker to work. Still, if the issue persists, then you may need to check the ice maker control assembly, part number PS2341896, as it controls all the functions of the ice maker, and if this part is faulty, you may need to replace it. We hope this helps!
Lifted the front up onto a scrap 2x4 to get it off the ground and it had 1 bolt that you removed to get the old item off and replace with new assymbly and 1 bolt to re attach. This sat broke for over a year becuase I thought it would be alot harder to fix, found the part on parts select ordered it recieved it in approx 2 days and had it f
... Read moreixed in less than 15 minutes. I would recommend parts select to anyone who told me that they had a appliance broken. Thanks
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
Remove the icemaker service door... gently pry the door pins from the hinge sockets. Remove the 3 screws from the under side of the icemaker with a nut driver (1/4"). Gently remove the icemaker . It's a tight fit between the top of the compartment and the icemaker lower support tray. Next, disconnect the electrical connector at the ri
... Read moreght side. You're done! Reverse procedure for installing. Good luck. Remember, your working with cold plastic...take your time and don't force too much.
