This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it...
This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This ice maker (Ice Maker Assembly, Refrigerator Ice Maker) produces ice cubes that are ejected into the storage bucket. It is located in the freezer section of your appliance, mounted on the freezer ...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor ...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This genuine OEM crisper frame support provides stability to the crisper drawer in your refrigerator, preventing sagging or collapse under the weight of produce. It is typically located at the bottom ...
This water filter bypass cap, also known as a water filter bypass plug, is an authentic OEM part that replaces the regular water filter cartridge in refrigerators. It allows water to flow freely throu...
Glass NOT included. If you are looking for the center rail see related parts below. This is used for the crisper drawer in the refrigerators
$187.32
In Stock
Questions And Answers for KBFS25EVMS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mireille
May 25, 2023
I need to order a door gasket in grey for my fridge, because ours is damaged. Which one should I order? Thank u in advance. Is it the PS11759515 or another one?
For model number KBFS25EVMS00
Hello Mireille, thank you for your query. The gray gasket compatible with your refrigerator is part number PS11759515. Good luck with your repair!
Trying to determine what year this fridge was manufactured to see if still under 10 year warranty for compressor ? Serial number: Kw4103687
For model number KBFS25EVMS00
Hello Lorie and thanks for writing.
This fridge was made in the year 2000. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Elizabeth
March 25, 2022
Mi hielera tiene la alarma sonando la parte de arriva no tiene 53 de helado adentro y firizzer 33
For model number KBFS25EVMS00
Hello Elizabeth, thank you for contacting us. The door alarm goes off if the door is open or not closing properly. We would suggest the Freezer Door Gasket , (Black) part number PS3651266, and (White) part number PS3651286. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Michael
June 15, 2023
Both displays reading off buttons don't work
For model number KBFS25EVMS00
Hello Michael, thank you for the question. The issue is with the control panel overlay. We recommend you replace the control panel overlay, part number PS11728007, to fix the problem. We hope this solves your problem!
THE FREEZER LOSES FREEZING ABILITY AND TEMPERATURE STARTS RISING.
ANY SUGGESTIONS??
For model number KBFS25EVMS00
Hello Terry, thank you contacting us. Based on our understanding of the issue, we would recommend checking the temperature sensor by doing the continuity test. If the issue still occurs, you may need to check the compressor start relay, part number PS11750123, to fix the issue. We hope this helps!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Interior surface of ice tray felt rough & flaky (coating deteriorated) so cubes would not release. Unplug appliance. Remove timer cover by hand pressure @ edge. Remove single attachment screw & bracket at lower front of icemaker. Disconnect wiring harness from socket @ rear of compartment. Tricky part was determin
... Read moreing what type of connection held the other two attachment points along the long edge of the icemaker. I did not have repair manual or useful drawing but looked @ PartsDirect pic of side brackets & used a small mirror to confirm that mine were also some sort of "snap in" attachment. Remove icemaker unit by pushing upward and outward on the unit. I takes a good bit of pressure and will pop loose, but be careful not to break attachment bracket from freezer wall. Scavenge shut off bar and wiring harness from old icemaker once you have it out & attach to new one before installing it back in freezer. Again, you might find a mirror useful to align those pesky snap-in brackets with the new unit. Since you probably kept your freezer running while waiting for the part, the plastic snap-ins will be cold and brittle. I warmed them up first by applying a dampened cloth heated in the microwave to make them a little more pliable. A good push of the new unit towards the snap-ins along with some upward force will get it stable. Reattach the metal screw in bracket & connect the wiring harness to rear plug... and don't forget to plug the whole thing back in. It will take awhile for the first batch of cubes dump as the timer may need to cycle completely around to get to the fill cycle... be patient. Dump the first couple of batches of cubes just to make sure you're free of any residue.
unplugged refrigerator and shut off water, removed one screw and loosened two more, after removing one side of the ice bucket rail, unplugged electrical from old ice maker. Then I removed the bail and out on new one, reinstalled ice maker in reverse order from taking it out.
