ED5KVEXVB00 Whirlpool Refrigerator - Overview

Hi Stan, thank you for your question. When you are having temperature problems in your fridge, there are a few parts that could cause the issue. You can use a multi meter to test most of the parts. Make sure you cut power to your appliance before doing any repairs or tests. First you should test your defrost thermostat. Place the thermostat in ice cold water for 2-3 minutes after removing it from your appliance. It should be reading 0 ohms to be working correctly. Another part to check would be your defrost heater. Remove it from the appliance. It should be reading anywhere between 0 - 50 ohms to be working. You could check your temperature sensor. To find the correct reading for this part you will have to refer to your tech sheet that comes with your appliance. You can usually find this tech sheet behind the bottom grille of your fridge on either the right or left side. These are the most common parts that cause this issue in your appliance. So it is suggested you check them first. I hope that helps. Good luck with your repair.

Hello Craig, thank you for your question. Your water filter can be located in the bottom grille of your refrigerator. Push the button located on the left until it releases the filter. We hope this helps.

Hello Brenda, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the temperature control thermostat, the evaporator fan motor, the condenser fan motor, the run capacitor, the start relay, the defrost thermostat, the defrost heater, and the defrost control board. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Check the board for any loose connections or visible damage. You may also want to check the air diffuser as well, part# PS11749090. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Daniel, thank you for your inquiry. According to our research, your unit uses 115 volts and 15 or 20 amps. The wattage of unit is 1725 or 2300 watts. Please submit a new question if you have any follow-ups!

Hello Belvyn and thank you for writing. Sounds like you have 2 separate issues. One sounds like you might need to replace the capacitor PS11757023 to get the fan running again. Two a stuck or faulty light switch PS11738900