This silverware basket is gray in color and measures 8 inches wide by 11-1/2 inches high by 12 inches deep. The silverware basket is used to hold small utensils such as forks, spoons, and knives durin...
This lower dishrack roller is less than two inches in diameter. It is made entirely of white plastic. If you find that your dishwasher is making loud noises or the lower rack is getting stuck when you...
This dishwasher door gasket, or door seal, allows the dishwasher door to have an airtight seal when closing the door. No tools are required for this installation, simply remove the existing gasket and...
This upper dishwasher dishrack roller, also known as a dishrack wheel, allows you to roll the dishwasher rack easily on the support rails. If your dishwasher rack is disconnected or the rack is broken...
This is a rail stop for your dishwasher. No tools are required for this repair. it simply pops on and off the end of your slide rail when pressing the locking tab. This part is sold individually, so i...
The door spring retainer is used in dishwashers. It attaches and holds the door spring to the support frame. If your dishwashers door keeps crashing, or both the door and dish rack are falling apart, ...
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
This genuine inner door foam insulation strip, sometimes known as bottom seal foam, is used to create a waterproof seal that helps prevent leaking from the door area of the dishwasher. The existing in...
This part senses when the dishwasher door is closed so the cycle can start, and prevents it from starting if the door is not closed. If the dishwasher will not start or will not close, you may need to...
$86.06
In Stock
Questions And Answers for DWU8860AAX
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lois
April 2, 2023
Is there a way, on this old dishwasher, to clean filter or wherever food gets trapped? Or does everything just go down the drain, unlike the newer models?
For model number DWU8860AAX
Hi Lois, thank you for getting in touch. Based on our research, your model has a pump housing filter, part number PS11747618, which might need cleaning. First, remove the lower rack. Then, remove the lower spray arm. Remove the pump cover by removing the screws all around the circumference. Lift the cover off to access the filter. Grasp the filter and pull it off. Now, wash the filter for any debris or food particles stuck in it. We hope this helps!
HOW DO YOU TEST AND CHANGE A FLOAT SWITCH ? I HAVE 2'' WATER IN THE BOTTOM OF DISHWASHER ... THANKS ...
For model number DWU8860AAX
Hi Stanley,
Thank you for your question. You will need to use a multimeter to test the float switch. Before removing and testing the float switch, you will need to disconnect the power to the dishwasher. Once the float switch has been removed from the dishwasher, set your multimeter to the Rx1 setting and touch the probes to the switch’s terminals. This should produce a reading of zero or infinity. With the probes still touching the terminals, press in on the switch’s button, this should change the reading to the opposite extreme (from zero to infinity or infinity to zero). If your test results produce readings that differ from the above, you will need a replacement float switch. We have included a link to one of our YouTube videos that you may reference for information on how to remove and install the float switch. The dishwasher in the video may not be the same as yours, but it will give you a general idea on how to install the part. We hope this helps!
I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks
I ordered two clips just in case. Turns out I needed both of them. Since I hadn't seen the adjustable tines installed, it took some time to figure out how to put the assembly together.
For some reason I had the dishwasher for 7 years before it occurred to me to order the replacement parts. It's much more efficient to use wit
... Read moreh the adjustable tines properly installed as I can load approximately 25% more plates than before.
I ordered a new replacement basket. The new one is a little different but it fits in the same place and takes up the same amount of room in the dishwasher. It looks very nice too.