Models
>
DNT18F9L-A
DNT18F9L-A (5B41B) Admiral Refrigerator - Overview
Sections of the DNT18F9L-A
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Door Shelf Trim Retainer
PartSelect #: PS11743360
Manufacturer #: WP65245-1
This door shelf trim retainer is just over one inch long. It is all white in color and it is made entirely of plastic.
$11.72
In Stock
Food Door Gasket (measures 30-3/4" by 39')
PartSelect #: PS11743835
Manufacturer #: WP70048-3
This white fresh food door gasket measures approximately 30-3/4 inches by 39 inches. It is used on many fresh food doors of top mount model refrigerators that have been manufactured since 1980.
$228.01
In Stock
Hinge Pin Bushing
PartSelect #: PS2064817
Manufacturer #: 66036-1
This bushing is used with a 1/4-inch pin. This part is found in refrigerators (and sometimes freezers). The bushing provides a bearing surface for the hinge pin that rotates. Every time you are openin...
No Longer Available
Egg Tray
PartSelect #: PS11743588
Manufacturer #: WP67004411
This egg tray holds fourteen eggs.
$11.14
In Stock
Door Shelf Retainer Bar - Cut to Fit
PartSelect #: PS11743151
Manufacturer #: WP61003045
This cut-to-fit refrigerator door shelf retainer bar comes at twenty-seven inches long. It is made entirely of metal.
$83.45
In Stock
Freezer Door Gasket
PartSelect #: PS2075971
Manufacturer #: 70047-3
This white freezer door gasket is used to seal the freezer door when closed to keep the cool air inside and the room air out.
No Longer Available
Washer
PartSelect #: PS11742796
Manufacturer #: WP52185-1
This door hinge washer is less than an inch in diameter. It is all white in color and it is made entirely of plastic.
$7.14
In Stock
Single Flush-Mount Screw
PartSelect #: PS2063858
Manufacturer #: 65275-57
Sold Individually. This screw holds the handle in place on the freezer door.
No Longer Available
Questions And Answers for DNT18F9L-A
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the DNT18F9L-A
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
failure to seal fridge doors adequately.
The doors had many hex screws. Using the correct socket size was critical. Empty the door shelves first. The screws had to come out because the new seal had slot holes for them to go between. Take off half of the screws from the top and sides and partially remove the old seal. Attach the new seal and do the same with the bottom half. With
... Read more
the new seal on the lower door it at first looks like a poor seal. Gently press the door and hold it for about 5 min. Then the seal is ok. The door can then can be open and shut gently with a good seal. With a good set of sockets the work can go faster than the time given.
Read less
Parts Used:
![](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11743835-1-S-Whirlpool-WP70048-3-Food-Door-Gasket-measures-30-3-4-amp-quot-by-39-amp-39.jpg "Food Door Gasket (measures 30-3/4" by 39') – Part Number: WP70048-3")
-
Joel from Upper Arlington, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Socket set
15 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door sagging (bushings gone), seal bad
r#1 removed upper hinge bracket, removed icebox door, unscrewed middle hinge bracket, removed main door, extracted broken plastic bushings, pushed in new bushings, reversed process while adjusting doors. works fine now.
#2 compared door seal with new one from partselect. Turned out that new seal is not magnetic. Had to return. ... Read more Door still has bad seal.
#2 compared door seal with new one from partselect. Turned out that new seal is not magnetic. Had to return. ... Read more Door still has bad seal.
Read less
Parts Used:
-
Kenneth from Marble Falls, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
7 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed To Replace Gasket/Seal On Fridge
Most importantly make sure you get the wrinkles out of the gasket, a step we did not follow exactly, so we ended up having to work the seal a lot more to make it fit properly which of course made the repair take longer than needed. Other than that no problems here
Parts Used:
-
Nancy from Malden, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!