Models
>
CVG2420W
CVG2420W Jenn-Air Cooktop - Overview
Sections of the CVG2420W
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Cooktop Downdraft Vent Grease Filter
PartSelect #: PS11757584
Manufacturer #: WPY706012
This is a grease filter, and it works with your range/stove/oven. This part is chrome-colored and measures 16.5 inches long by 9 inches wide. It is made of metal and is intended for use with downdraft...
$48.41
In Stock
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
In Stock
Burner Grate
PartSelect #: PS2077025
Manufacturer #: 71001006
Light gray in color. Sold individually.
No Longer Available
Motor Isolator
PartSelect #: PS11743903
Manufacturer #: WP71003558
This motor isolator is less than an inch long.
$8.03
In Stock
Air Inlet Grill
PartSelect #: PS2077285
Manufacturer #: 71001673
This part is located over top of the blower in the center of the stove top.
No Longer Available
Exhaust Vent Blower Wheel
PartSelect #: PS11757592
Manufacturer #: WPY707985
This exhaust vent blower wheel is almost seven inches in diameter, and just under four inches deep. It is made entirely of metal and is used with a range's venting system.
$92.66
In Stock
Screw
PartSelect #: PS2076840
Manufacturer #: 707407
This screw is sold individually.
$9.55
In Stock
Large Burner Cap
PartSelect #: PS2077066
Manufacturer #: 71001075
This burner cap is made of a ceramic-type material and the top is coated in a light gray porcelain/enamel-type substance.
No Longer Available
Fan Switch Grommet
PartSelect #: PS2201758
Manufacturer #: Y706103
This grommet is located under the fan switch.
No Longer Available
Questions And Answers for CVG2420W
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anita
January 13, 2023
How can I get parts for my Jennair cook top stove. I need the burners, the grease screen and the vent cover. Thank you for all you help with this request.
For model number CVG2420W
Hello Anita, thank you for writing. From the list of parts you are searching for, the only one that is available is the Cooktop Downdraft Vent Grease Filter PS11757584. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burners kept clicking after ignited
After I bought this part, installed it and the clicking still did not stop I finally found the problem. If your ignitor can still click then it's still good. The problem is the electric connection between the head burners and the base burners (Top Assembly diagram). Put a little weight on the head burner while grabbing it with your hand a
... Read more
nd grind it into the base burner with a little twisting motion. Repeat for all 4 burners. Presto! (you could be more professional and use steel wool or sandpaper to.)
If you stll want to know how to install this part begin by removing the control panel bracket #24. Then remove the glass top w/seal #9 (after removing the knobs). You may have to tease this out because the rubber seal is sticky. The switch plate #14 comes off after removing 2 obvious screws at each end and 2 not-so-obvious star screws attaching it to the manifold #6. Remove the spark module by removing 2 of the 3 screws and sliding it out of the 3rd screw.
If you stll want to know how to install this part begin by removing the control panel bracket #24. Then remove the glass top w/seal #9 (after removing the knobs). You may have to tease this out because the rubber seal is sticky. The switch plate #14 comes off after removing 2 obvious screws at each end and 2 not-so-obvious star screws attaching it to the manifold #6. Remove the spark module by removing 2 of the 3 screws and sliding it out of the 3rd screw.
Read less
Parts Used:
-
Robert from Ranchos de Taos, NM
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
31 of 45 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace Grease Filter For Downdraft Stove Top
Lift off blower vent cover. Lift out old filter. Clean walls and bottom of down draft using degrease soap and warm water. Dry. Discovered my grease filter will not install diagonally as shown in unit manual. Decided to drop into downdraft and put in front of fan suction. Found this left a gap at the top of fan suction that was not co
... Read more
vered by the filter. Cut piece of wood 1 inch thick and width and length to drop down in the downdraft and lay on bottom. Set filter on top of wood in front of the fan suction. Verified that fan suction would pull filter tight against the opening by turning fan on and off. Put vent cover back over downdraft and told wife I was done.
Read less
Parts Used:
-
Johnnie from Daphne, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
27 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filter was starting to come apart from frequent cleaning.
I removed the center vent and inserted the filter...easy as pie...I went to your website and everything was there in an easy to follow way that even I could understand, my husband was totally impressed that I took care of it on my own....silly man.....it was so easy and delivery was extremely quick....so simple....thank you for making it
... Read more
so!!!!
Read less
Parts Used:
-
Mary H. from Appleton, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!