Weed Eater Tiller Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Weed Eater Appliance Parts
Shop By Appliance Type Shop By Part Type

Popular Weed Eater Tiller Parts

Clevis Pin – Part Number: 532132673
Your Price
$3.99
   In Stock
Weed Eater Tiller Clevis Pin
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9009427
Manufacturer Part Number 532132673
This clevis pin is an OEM replacement part that is compatible with various makes and models of tiller and is sold as an individual part. The purpose of this pin is to snap or break under a certain amount of pressure if your tiller is jammed, to protect the more valuable components of your tiller. Measuring at approximately 2-inches long and made of high-quality metal, replacing this pin should only require pliers to swap out the old pin for the new.
Clip, Hairpin – Part Number: 532003146
Your Price
$3.99
   In Stock
Weed Eater Tiller Clip, Hairpin
PartSelect Number PS9007536
Manufacturer Part Number 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1.5 inches long. The clip acts as a fastener to prevent the moving parts from loosening and falling off during usage. The clip is vulnerable to corrosion and general wear over time. However, it can also fail prematurely due to overloading and excessive stress. A damaged hairpin clip will result in misalignment of parts, accidental disassembly, increased friction and wear, and potential harm to the user. Remove the faulty pin and align the new one with the insertion points. Ensure that the pin is securely fitted in its appropriate slot and compress the ends to prevent it from dislodging.
Tine, Inner, L.H. – Part Number: 532006554
Your Price
$16.18
   On Order
Weed Eater Tiller Tine, Inner, L.H.
PartSelect Number PS9285516
Manufacturer Part Number 532006554
Rivet Rd Hd Drilled 3/8 Dia – Part Number: 532126875
Your Price
$6.21
   In Stock
Weed Eater Tiller Rivet Rd Hd Drilled 3/8 Dia
PartSelect Number PS9285897
Manufacturer Part Number 532126875
Bearing, Shaft, Ground Drive R.H. – Part Number: 532143008
Your Price
$7.87
   On Order
Weed Eater Tiller Bearing, Shaft, Ground Drive R.H.
PartSelect Number PS9016290
Manufacturer Part Number 532143008
Thrust Bearing Race – Part Number: 532001370
Your Price
$6.21
   In Stock
Weed Eater Tiller Thrust Bearing Race
PartSelect Number PS9007713
Manufacturer Part Number 532001370
Bearing, Shaft, Ground Drive L.H. – Part Number: 532431219
Your Price
$10.76
   Special Order
Weed Eater Tiller Bearing, Shaft, Ground Drive L.H.
PartSelect Number PS9019290
Manufacturer Part Number 532431219
Chain #35-50 Pitch – Part Number: 532102134
Your Price
$34.86
   In Stock
Weed Eater Tiller Chain #35-50 Pitch
PartSelect Number PS9008326
Manufacturer Part Number 532102134
Seal Asm, Oil – Part Number: 532155236
Your Price
$7.46
   In Stock
Weed Eater Tiller Seal Asm, Oil
PartSelect Number PS9017744
Manufacturer Part Number 532155236
Lock, Handle – Part Number: 532109229
Your Price
$7.46
   In Stock
Weed Eater Tiller Lock, Handle
PartSelect Number PS9007833
Manufacturer Part Number 532109229
Measuring approximately 1-inch in length, this handle lock is designed for use with various models of tiller machines. This handle lock is fastened to the base of the handle to secure the lock lever and is a genuine OEM metal part. This part is sold individually, so depending on your model, you may need 2 of them. Be sure to check your user manual or any diagrams for confirmation.
Installation Instructions
richard from MECHANICSVLLE, VA
broken drive axle chain
removed engine, sheet metal, handle bars, and tines. Seperated transmission case and replaced broken chain. This is not difficult it's just time consuming. A tiller repair shop would charge about $400 to do this job. It cost me $40 for a chain and gasket, Both fit perfectly, great service. Thanks Read more...

Weed Eater Tiller Appliance Types

Back to Top

Related Weed Eater Tiller Parts

Back to Top

Popular Weed Eater Tiller Models

Below are the most popular Weed Eater Tiller models we have. Enter your model number in the search box to find your model.

Need Help Finding Your Model Number?
View More
Back to Top