Weed Eater Lawn Mower Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Weed Eater Appliance Parts
Shop By Appliance Type Shop By Part Type

Popular Weed Eater Lawn Mower Parts

Ring Klip Number T5304-75 – Part Number: 812000029
Your Price
$3.99
   In Stock
Weed Eater Lawn Mower Ring Klip Number T5304-75
★★★★★
★★★★★
1 Review
PartSelect Number PS9143890
Manufacturer Part Number 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...
Washer 25/32 x 1-1/4 x 16 Ga. – Part Number: 532121749
Your Price
$3.99
   In Stock
Weed Eater Lawn Mower Washer 25/32 x 1-1/4 x 16 Ga.
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9008998
Manufacturer Part Number 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending on the equipment, its general function is to spread the load under a bolt. Ensure you consult your owners manual or check your model number to confirm this is the washer you need for your equipment. This part will need to be replaced when your existing one is worn or damaged. It is an easy repair according to our customers, and does not require any special tools.
Installation Instructions
Frederick from BINGHAMTON, NY
Front wheels, too much end play
Shimmed the wheels out on axle.. No more slop. Read more...
Lawn Tractor Mandrel Assembly – Part Number: 587819701
Your Price
$48.56
   In Stock
Weed Eater Lawn Mower Lawn Tractor Mandrel Assembly
★★★★★
★★★★★
2 Reviews
PartSelect Number PS12087499
Manufacturer Part Number 587819701
Bolt and Washer Assembly – Part Number: 532193003
Your Price
$8.71
   On Order
Weed Eater Lawn Mower Bolt and Washer Assembly
PartSelect Number PS9020856
Manufacturer Part Number 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
Blade, 22" – Part Number: 532406713
Your Price
$15.90
   In Stock
Weed Eater Lawn Mower Blade, 22"
PartSelect Number PS9017810
Manufacturer Part Number 532406713
This blade is sourced directly from the manufacturer for use in Craftsman and Husqvarna lawn mowers. The blade is the part of the mower that is responsible for cutting and mulching the grass. It is 22" long, made of black metal, is not part of a kit or assembly, and is sold individually. If you hit a hard object, you may bend the blade, causing a vibration. You may also have problems with the grass being cut as the blade dulls over time. If the blade is bent, damaged, or worn, it needs to be replaced. You will need a socket set to complete this repair. Customers rate this repair as Easy.
Fixes these symptoms
Installation Instructions
Charles from Memphis, TN
I had to buy Troy-Bilt parts to adjust for a Murray Lawn Mower
Grind off 1/4" of each end of the 22" blade to fit 21' Mower.
Make Bend adjustments for the Handle to fit. Read more...
Switch-Ign – Part Number: 532193350
Your Price
$14.93
   In Stock
Weed Eater Lawn Mower Switch-Ign
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9020864
Manufacturer Part Number 532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various functions including starting, stopping, running and reversing. The switch works by connecting/disconnecting the circuit between the battery and the ignition system. The switch can fail either from physical damage or faulty electrical wiring. If the ignition switch is no longer working, you will not be able to operate your equipment. To access the faulty switch, first disconnect the battery, and wiring harness. Squeeze the tabs on the sides of the switch and pull it out from its mounting position. Plug the new switch in place and ensure that the tabs are engaged. Finish the repair by reconnecting the wiring harness and battery. If your current key is in good working condition, you can continue to use it. However, if it is not, it is recommended to replace the key at the same time. Each ignition switch is sold individually.
Fixes these symptoms
Installation Instructions
Russell from MACON, GA
Dryer runs no heat
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats. Read more...
Washer Hardened – Part Number: 532188967
Your Price
$4.99
   In Stock
Weed Eater Lawn Mower Washer Hardened
PartSelect Number PS9015920
Manufacturer Part Number 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and will need to be replaced. You may notice this part is damaged if you start hearing a grinding or rubbing noise between the tire rim and ring clip. You will need a pair of needle nose pliers to carry out this repair, which our customers generally found easy. You will locate the washer on the spindle, between the wheel and the ring clip.
Handle Knob – Part Number: 532185577
Your Price
$3.99
   In Stock
Weed Eater Lawn Mower Handle Knob
PartSelect Number PS9020379
Manufacturer Part Number 532185577
Cover, Dust, Wheel – Part Number: 581840401
Your Price
$4.99
   In Stock
Weed Eater Lawn Mower Cover, Dust, Wheel
★★★★★
★★★★★
3 Reviews
PartSelect Number PS9982436
Manufacturer Part Number 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axle. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.
Cable – Part Number: 532183281
Your Price
$13.69
   In Stock
Weed Eater Lawn Mower Cable
★★★★★
★★★★★
4 Reviews
PartSelect Number PS9014267
Manufacturer Part Number 532183281
Made of a durable metal with a plastic cover, this cable is used to control the on/off function of the engine on various lawn mowers. It is not part of a kit or assembly, it is black, and it is sold individually. When this part is broken or worn, you will be unable to start the engine, at which point it needs to be replaced. No tools are needed to complete this repair. Customers rated this repair as Easy.
Installation Instructions
Ralph from LIGONIER, PA
broken cable that s needed to start start the mower
i just took off the old one and the new one just fit right on. Read more...

Weed Eater Lawn Mower Appliance Types

Back to Top

Related Weed Eater Lawn Mower Parts

Back to Top

Popular Weed Eater Lawn Mower Models

Below are the most popular Weed Eater Lawn Mower models we have. Enter your model number in the search box to find your model.

Need Help Finding Your Model Number?
View More
Back to Top