This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to produce fine clipping...
This trail shield, also referred to as a rear skirt, is designed for use with various makes and models of lawn mowers and is a genuine OEM part. This trail shield is sold as an individual part without...
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
The O-Ring is a black rubber part, used to provide a seal between two pieces. It can be used in various locations on a variety of equipment. Installation is rate as "Easy" and will require a screw dri...
This zone control cable is for lawnmowers.
The zone control cable stops the engine when you let go of the handle.
Wear work gloves to protect your hands during this repair.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alice
May 14, 2023
I need 2 front wheels for my Craftsman FWD Mower. M230 Model 12AVB2R3793. Where can I buy them?
For model number 12AVB2R3793
Hello Alice, thank you for your query. The front wheel compatible with your model is part number PS11812390. It is sold individually. We hope this helps, good luck with this repair!
whats the spark plug gap number needed for this lawn mower??
For model number 12AVB2R3793
Hi Chris, thank you for contacting us. Spark plug gap for your models spark plug should be .030”. We hope that helps!
Was this helpful?
Thank you for voting!
Tom
March 23, 2024
What’s the part number for the front drive wheels for this mower
For model number 12AVB2R3793
Hi Tom, thank you for your inquiry. The front wheels for your model have the same part number PS11812390. If you need help placing an order, customer service is open 7 days a week!
Hello Ben, thank you for reaching out. According to our research, the height adjuster for your model does not come separately. It comes as a part of the front axle assembly, part number PS9154368. If you need help placing an order, customer service is open 7 days a week!
This was an OHV motor so in order to get to the head, you must remove the valve cover and remove the push rods. Remove all four head bolts in an even star pattern. Remove the old gasket and scrape all remaining gasket gunk. Put new gasket on and tighten head back on with an even star pattern. Slide push rods back in and adjust valves to .
... Read more004 of an inch and put valve cover back on and start it up!
Remove the top cover and pull cord assembly. Remove the muffler cover. Lift off the gas tank and disconnect from the air filter box. Remove the air filter box and carb from the head cover as a single unit. Remove the head cover. You can leave the valve cover in place. Remove old gasket material. Clean surfaces. Replace gasket. Reassemble
... Read more. *if the valve stems come loose from their seats or rockers, remove the valve cover and reseat. Reassembly is the opposite of disassembly. Happy mowing.