This part is a replacement tine row clip for your dishwasher. The tine row clip is adjustable, and it fits onto your dishrack to holds the tines into place. If your dishrack tine rows will not stay in...
This door handle end cap is supplied directly by the manufacturer for use with dishwashers. It is a genuine OEM part that is designed to fit just like the original piece. The end cap is made of highly...
This micro filter is a genuine OEM replacement part that is compatible with dishwashers. Its primary function is to catch and trap small particles of food, debris, and other contaminants that may be p...
This circulation pump with heater is for dishwashers.
Circulation pump with heater moves heated water through the spray arm to clean the dishes.
Unplug the dishwasher before installing this part...
This wheel kit is used for the lower rack of your dishwasher. The kit includes 8 wheels and axels. To install you can simply clip the wheel onto the frame. There are eight wheels on the lower rack in...
This part is the replacement screw for your washer. The head is approximately 1/4 inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This...
This is a manufacturer-made lower dishrack roller wheel for dishwashers. This wheel is used to support the lower dishrack in your dishwasher and allow it to slide in and out smoothly. If this wheel is...
$7.42
In Stock
Questions And Answers for SHXM4AY55N
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cecil
December 17, 2023
TOP RACK ROLLER WHEEL BROKEN. CAN NOT FIND ITS REPLACEMENT, THIS IS THE ROLLER THAT ALLOWS THE RACK TO SLIDE IN AND OUT
For model number SHXM4AY55N
Hi Cecil, thank you for reaching out. The rail-pull out for your model is part number PS10061256. Glad to be of assistance!
Remove the dishwasher from under the counter. Remove door springs. On the inside of the lip of the door remove the 6 screws that hold the outer door panel on, and remove panel. this will expose hinge screws. Remove the two screws per side holding the inner door to the hinge assembly. Take pictures of the way the gasket's grey plastic end
... Read morecap assembles between the inner door frame and the hinge, and remove the inner door. The old gasket has a channel lip that sits on the plastic edge of the washer tub, pull it off this lip and discard. Install new gasket and put it all back together! Use this opportunity to clean the gunk out of the upper door seals.
I watch utube to assess the problem then took eveything apart and saw the build up on the filter, which i had never cleaned. I tried to clean it but was unsuccessful so order the filter from partselect and it came within a couple of days, installed very easily and began to clean as it always had.