Models > 030377-0

030377-0 Troy-Bilt Generator - Overview

Sections of the 030377-0

[Viewing 4 of 4]
Alternator Diagram and Parts List for Troy-Bilt Generator
Alternator
Control Panel Diagram and Parts List for Troy-Bilt Generator
Control Panel
Main Unit Diagram and Parts List for Troy-Bilt Generator
Main Unit
Wheel Kit Diagram and Parts List for Troy-Bilt Generator
Wheel Kit
Keep searches simple, eg. "belt" or "pump".
Fuel Valve W/Bushing – Part Number: 192980GS
Fuel Valve W/Bushing
★★★★★
★★★★★
(5)
PartSelect #: PS8911051
Manufacturer #: 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve a...
$19.31
  In Stock
Gasket- Exhaust – Part Number: 692237
Gasket- Exhaust
★★★★★
★★★★★
(1)
PartSelect #: PS9294810
Manufacturer #: 692237
$5.71
  In Stock
Assembly, Brush Holder – Part Number: 91825GS
Assembly, Brush Holder
★★★★★
★★★★★
(1)
PartSelect #: PS9157810
Manufacturer #: 91825GS
$59.96
  In Stock
Support, Leg – Part Number: B1764GS
Support, Leg
★★★★★
★★★★★
(1)
PartSelect #: PS9184762
Manufacturer #: B1764GS
  No Longer Available
Breaker, Circuit, 20A – Part Number: 202030GS
Breaker, Circuit, 20A
PartSelect #: PS8914391
Manufacturer #: 202030GS
$105.26
  In Stock
Retaining Ring – Part Number: 703976
Retaining Ring
PartSelect #: PS11829825
Manufacturer #: 703976
$4.99
  In Stock
Cover, Rbc Plastic With Cap – Part Number: 195422GS
Cover, Rbc Plastic With Cap
PartSelect #: PS8909587
Manufacturer #: 195422GS
This rear bearing cover is designed to protect and insulate the rear bearing of the engine. It is an authentic OEM replacement part with a diameter of approximately 8 inches. It comes with a center/du...
$14.51
  In Stock
Screw, M5 - .8 X 10 Taptite – Part Number: 74908GS
Screw, M5 - .8 X 10 Taptite
PartSelect #: PS9116859
Manufacturer #: 74908GS
$3.99
  In Stock
Outlet, 120V, 15/20A Dplx – Part Number: 197731GS
Outlet, 120V, 15/20A Dplx
PartSelect #: PS8911020
Manufacturer #: 197731GS
$18.46
  In Stock
Nut, M8 Flange Serrated – Part Number: 67989GS
Nut, M8 Flange Serrated
PartSelect #: PS9293606
Manufacturer #: 67989GS
The manufacturer certified M8 Flange Nut is an 8mm silver, serrated, metal part. It can be installed using a wrench or socket, and is used to secure parts in place and secure the load. If broken or da...
$4.99
  In Stock
Kit,Vibration Mount, 45'. – Part Number: 194150GS
Kit,Vibration Mount, 45'.
PartSelect #: PS9269331
Manufacturer #: 194150GS
$15.18
  In Stock
Kit, Hose Formed – Part Number: 195207GS
Kit, Hose Formed
PartSelect #: PS8912245
Manufacturer #: 195207GS
$14.23
  Special Order
View More
Back to Top

Questions And Answers for 030377-0

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top

Common Symptoms of the 030377-0

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Parts Used:
Fuel Valve W/Bushing
  • James from PICAYUNE, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank
Parts Used:
Fuel Valve W/Bushing
  • Alan from RADFORD, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burnt circuit breaker
Plug and play disconnected wires removed old breaker snapped in new breaker reconnected wires
Parts Used:
Breaker, Circuit, 20A
  • Carroll from McAlester, OK
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top